manualshive.com logo in svg

Rosco Silk 210, User Manual, Page: 7 / 22

Share
Download
Rosco Silk 210 User Manual Download Page 7

unpaCkIng

Carefully remove the unit from the box. 

Do not attempt to operate Silk

TM

 LED fixtures if there are any signs of physical 

damage. In case of damage, contact your local Rosco dealer. Ensure the Light 
Stand Receiver is securely mounted onto the yoke before rigging.

Your Rosco Silk

TM

 LED fixture will arrive with a power supply attached to the 

back of the unit, and the power cord detached from the unit. Plug the IEC 
connector into the power supply.

Safety cables must securely be attached to the designated slots on the Silk

TM 

fixture (detailed on page 7) and be as short as possible to reduce travel 
distance if primary hanging accessory fails. The Silk

TM

 210 weighs 12.8 lbs 

(5.9 kg) excluding accessories.  The combined weight should be considered 
when choosing a suitable safety cable.

Ensure that the yoke locking handle is correctly tightened after positioning 
Silk

TM

. If the locking handle is not tightened correctly, the fixture may swing. 

- 6 -

Summary of Contents for Silk 210























Reviews:

No comments