TROUBLESHOOTING
SYMPTOM
Tape/Tile will not
illuminate in Manual
Stand-Alone mode
Tape/Tile will not
illuminate in DMX mode
POSSIBLE CAUSE
Barrel Connections incomplete
Not plugged into AC Mains
Batteries charge depleted
CCT/DMX Controller set to DMX
mode
CCT/DMX Controller set to CCT
mode
DMX cable connections are not
secure
Incorrect DMX address
No DMX signal
SOLUTION
Check all connections
Check AC Mains connection
Check battery charge or replace
Confirm Controller is set to Manual
mode
Confirm Controller is set to DMX
mode
Check all DMX cable connections
Confirm DMX address
Confirm DMX console is powered
on and outputting signal
10
Summary of Contents for RoscoLED VariWhite Gaffer Kit
Page 7: ...4 6 11 3 9 8 2 7 1 5 10 7...
