Side 14
© ROPOX 2013
7.
Performance test
After installation and prior to use, all functions of the table must be tested. Subsequently this
test must be carried out by competent personnel at least once a year:
1.
Check that there is no load on the table.
2.
Check that there is nothing preventing the table from moving freely within the height
adjustment range.
3.
Push the “DOWN” button and move the table to the bottom position. Check that the
movement is even and smooth.
4.
Now move the table to the top position. Check that the movement is even and smooth.
If Tilt fitting is mounted:
5.
Push the “UP / DOWN” button for the tilt and tilt the tabletop to the upright and down
position. Check that the movement is even and smooth.
When the above mentioned items have been checked, the table is ready for use. See “Safety in
use” section 8.
8.
Safety in use
The table should only be used by people who have read and understood these instructions.
The table is not intended for lifting people or objects.
Always use the table in a manner precluding the risk of damage to persons or property. The
person, who operates the table, is responsible for avoiding damage or injury.
Children and people with reduced observational ability must only be allowed to operate the
table under supervision.
When the table is used in publicly accessible locations where children or other people with
reduced observational capability may get close to it, the person operating the table must
pay utmost attention in order to prevent dangerous situations.
Make sure that there is free space above and below the table to allow height adjustment.
Do not operate the table in the case of errors or damage.
Do not overload the table and make sure that the load distribution is correct.
In connection with inspections, service or repairs make sure that the table is not loaded.
Any modification of the table, which may influence its operation or construction, is
forbidden.
If the table has not been assembled in accordance with these mounting instructions, the
guarantee may become void.
Only use Ropox original spare parts as replacement parts. If other spare parts are used,
the guarantee may become void.
