Ropox Medi 2, User Manual, Mounting Instructions

Page: 39 / 68

Side 39
Support
Fault finding
The nursing table does not
move up and down when the
hand-control switch is pressed
Check:
6. If 230V has been connected and current is
available.
7. If all plugs have been correctly inserted.
8. If the tale only moves upward, check if the
safety stop has been blocked/activated.
9. Dismount all cables and mount them again.
10. Contact Ropox for support.
Waste handling
Used equipment must be disposed of according to national law. We
recommend dismantling of the product to the greatest possible extent so
that most parts may be recycled. Note that this product contains electrical
components. Examples of sorting groups: Metal, plastic, cables, electronic
parts and parts for destruction.
The nursing table may be used at temperatures from 5°C to 45°C
The nursing table may be used at a relative humidity between 5% to 85%
non-condensing
Factors affecting the product during storage and transport
i
i