Ropox Hudson 40-25023, User Manual, Mounting Instruction

Page: 11 / 28

Page 11
Mounting Instructions
3. Mounting to the wall
Attach the frame securely to the wall by using adequate bolts and rawlplugs suitable
for the type of wall construction / material on site. The Shower bed is being supplied
with a set (8 pcs) of screws and rawlplugs, which is ONLY used to mount the unit in a
concrete wall. If the unit must be mounted on another kind of wall, other kinds of
plugs and screws must be used. Shower bed is tested according to a load of up to
150 kg. applied to the shower bed.
The attachment holes can be marked up on the wall, four possibilities in the top,
and four in the bottom of the frame. Place the frame against the wall and make sure
it is horizontal. The frame is standing on two adjustable feet. The holes in the frame
are all Ø 10 mm. Remove the frame and drill the holes.
Force for each of the four screws in top of the
unit :
F
screw
= (150 kg * 923)/(1122 * 4 screws)
F
screw
= 31 kg for each screw
If you have other objects mounted right next to this shower bed, you have to
consider the risk of trapping, and therefore consider a safe distance to the other
objects.
Make sure that no dust or other obstacles are interfering with the rollers, chain,
sprocket or gas springs. This can cause malfunction and damage the system