Ropox 40-43011, User Manual

Page: 10 / 23

10
TF 200.01.0044_eng
4. Mounting instructions
4.1 Installation interfaces
Seat, with and without legs
CONSTRUCTION
The wall must be made of a material suited for
screw mounting and approved for damp
rooms.
Load-tested according to DS/ISO 17966 the
maximum user weight has been fixed at 150kg
(331lbs) for the seat without legs and 200kg
(441lbs) for the seat with legs. The hatched
area is the minimum area for reinforcement of
the wall.
Max. tensile load of upper screws
40-43011: 70kg/screw (154lbs)
40-43016: 225kg/screw (496lbs)
NOTE:
All dimensions are based on a fixed seat
height of 450mm (17 7/10”) above floor level. If a change of this height is required, the
recommended dimensions must be changed accordingly. Seat with legs must be mounted with a
seat height between 450 and 575mm (17 7/10” and 22 3/5”) above floor level.
The seat is supplied with a set of 4 screws and rawlplugs suitable for mounting on a concrete wall.
The fitter should always consider the material, condition and strength of the wall and use screws
and rawlplugs suitable for the specific wall type.