TF 200.06.0003_ENG
13
4.2.3 Operation of the bed guards
Mobilio Showerbed is always supplied with bed guards.
To operate the bed guards, pull the rubber tubing placed under the tabletop to release the locking
mechanism. The bed guard can then be pivoted to the desired mode.
Warning!
Make sure that the bed guard is locked securely in place when in use with a patient.
Locking is checked by shaking the bed guard back and forth ensuring that the locking pin is
fully engaged.
Warning!
The bed guard presents a tripping hazard when exiting the product. Keep your eyes on the
bed guard when exiting.
4.2.4 Safety in use
Warning!
Slats may be slippery when applying soap and cause patient to slip on surface. Make sure
that the patient is lying down and not stand on the shower bed.
Make sure to deploy bed guards when using product with a patient.
4.2.5 Ambient temperature
Allow the product to reach operational tempe5-40 °C when stored in temperatures outside this
interval.
Storage temperature
Time to reach operational temperature (+5 °C or
+40 °C) at 20 °C ambient temperature
-5 °C
3 Hours
+40 °C Battery
0 hours
+50 °C Without battery
3 Hours
