Specification
Operation
Manual over-ride
TR9016
Dual Flush Sensor Flush Plate
Please read completely before commencing. Retain for future reference
Installation & Operation Instructions - For Domestic Use Only
Batteries: 4x AA (LR6) Alkaline Batteries (Not supplied)
Ingress Protection: IPX4
At the end of life, please dispose of batteries and unit where municipal
recycling facilities exist. Do not dispose of in the regular waste.
This product is only suitable for domestic use.
4. Connect the air hoses from the cistern to the flush plate as shown.
Attach the blue hose to the half moon symbol and the transparent hose
to the full moon symbol.
Reduced Flush: Touch the shorter decal side with your hand to activate
the flush. The LED lights will Illuminate.
Full Flush: Touch the longer decal side with your hand to activate the
flush. The LED lights will Illuminate.
If the flush plate is touched for more than 5 seconds it won’t flush.
If batteries are exhausted completely, the glass fascia can be removed
to reveal the manual flush button.
The manual over-ride is not intended as a long term solution. When
using the manual push button, un-plug the cable ribbon and take the
front glass fascia off the chain links. Keep safe to prevent damage.
Brought to you by the Roper Rhodes Group
Brassmill Lane Trading Estate
Bath
BA1 3JF
t: 01225 303900
5. Make sure the cistern is fully commissioned before mounting the
bracket in place.
Locate the mounting bracket onto the fixing arms and secure the top
left and bottom right corners with the screws provided and tighten
with a screwdriver. Be careful not to overtighten.
Re-connect the clip links and cable ribbon to the glass fascia and insert
the battery holder. Place
the front glass plate and remove the protec-
tive film prior to testing its functioning. Once correctly attached the
flush plate will illuminate for a couple of seconds.
Manual Flush
v3. 02.18
Fixing Arms
Mounting
bracket
