background image

SAFETY NOTICE

The unit and basin should be fully secured to a suitably reinforced wall to ensure stability. The wall plugs supplied are only suitable for solid 
stone/brick walls. For plasterboard walls use specialist wall plugs along with supplementary wall strengthening as units can be very heavy. 
Seek advice from a specialist about the suitability of fixings to be used.

Wear suitable eye protection when drilling. Take care when using power tools near water - the use of a residual current device (RCD) is 
recommended. Beware of  hidden pipes or cables. Take care when drilling tiled surfaces as the drill might slip. Use a piece of masking tape 
to prevent the drill from wandering.

Ensure to follow these instructions to the end, acknowledging final instruction of siliconing basin in position. 

Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF

Tel:01225 303 900 | Fax: 01225 448 877

Email: [email protected] | Web: www.roperrhodes.co.uk

SYSTEM

WALL MOUNTED UNIT 

Please retain for future use

PAGE 1 OF 4

RR-SYSWM   REV : KA/11/2017

Replacement Components

Should you require any replacement components for this product please contact Roper Rhodes using the contact details below.

FURNITURE AFTERCARE INSTRUCTIONS

As with all wooden furniture, this product should be treated with care.

We recommend...

Wipe away any water splashes or condensa-
tion after use. Excessive exposure to water will 
deteriorate the furniture.

All bathrooms should be well ventilated with a 
suitable extractor fan.

Clean with a soft damp cloth only.

For removal of lime scale deposits use a 
suitable proprietary cleaner. If necessary test 
on an inconspicuous area first.

WIPE AWAY

Please DO NOT...

BLEACH

CLEANER

CREAM 

CLEANER

Do not scrub or scour 

Do not use abrasive cleaning agents 

Summary of Contents for SYSTEM Series

Page 1: ...osition Customer Services Roper Rhodes Ltd Brassmill Lane Trading Estate Bath BA1 3JF Tel 01225 303 900 Fax 01225 448 877 Email sales roperrhodes co uk Web www roperrhodes co uk SYSTEM WALL MOUNTED UNIT Please retain for future use PAGE 1 OF 4 RR SYSWM REV KA 11 2017 Replacement Components Should you require any replacement components for this product please contact Roper Rhodes using the contact ...

Page 2: ...hanger B C A Figure 3 WALLMOUNTING THE UNITS Customer Services Roper Rhodes Ltd Brassmill Lane Trading Estate Bath BA1 3JF Tel 01225 303 900 Fax 01225 448 877 Email sales roperrhodes co uk Web www roperrhodes co uk PAGE 2 OF 4 Figure 1 Figure 2 Middle hanger fixing for 1200mm unit only SYSTEM WALL MOUNTED UNIT Please retain for future use RR SYSWM REV KA 11 2017 NOTE When using furniture in conjun...

Page 3: ... FRONT ADJUSTMENT DRAWER FASCIA REMOVAL Remove the cover caps from the insides of the drawer on both sides to show the adjustment panels Horizontal adjustment Turn the screws shown until they become stiff turning past this point will move the drawer fascia left right Vertical adjustment Turn the screws shown to raise lower the drawer front This can be done on the left and right hand runners Fascia...

Page 4: ...andle holes Clamp a piece of wood on the back of the drawer being careful not to damage the front and drill through carefully from the front See figure 10 Screw handles into place For drawer top handles simply hold in place centrally on the top of the drawers and then screw in from behind using small screws provided Re install drawers ensuring that the drawer box clicks back into place Figure 11 T...

Reviews: