Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading
Estate, Bath, BA1 3JF
Tel:01225 303 900 | Fax: 01225 448 877
Email: [email protected] | Web: www.roperrhodes.co.uk
Installation Procedure:
Diverge Floor Mounted Unit
Installation & aftercare instructions (600mm Unit Shown for Illustration Purposes)
Please retain for future reference
600, 800 & 1000mm
RR-DIVFM REV : 21.07.2014
Replacement Components
Furniture Aftercare Instructions
As with all wooden furniture, this product should be treated with care.
We recommend...
Wipe away any water splashes or condensation after use. Excessive exposure to water will deteriorate the furniture.
All bathrooms should be well ventilated with a suitable extractor fan.
Clean with a soft damp cloth only.
Use a wax free polish if one must be used.
For removal of lime scale deposits use a suitable proprietary cleaner
Do not scrub or scour
Do not use abrasive cleaning
agents
Please DO NOT...
Should you require any replacement components for this product please contact Roper Rhodes using the contact details below.
Removing the Drawer
To remove the drawer, please follow the instructions below:
6
Remove the plastic covers completely
from both sides of the drawer.
5
Fully extend the
drawer.
While supporting
both the front and
back of the drawer,
pull the drawer
forwards with a
short sharp pull until
it is fully removed
from the runners.
Fitting the Basin
Once the basin has been plumbed in, finish by securing to the washstand using a silicone sealant (not supplied).
When re-fixing the drawer back to the runners, ensure that they click
into position on both sides and the back of the runner is flush with the
back of the drawer on both sides (see Fig.9).
5
Removing the Fascia
If it is faulty or damaged, the fascia can be removed and replaced. To remove the fascia please follow the instructions below:
7
Pull the fascia away from the body of the drawer.
To return the fascia, locate the bottom fixings into the sides of the
drawer and re-fix the plastic covers.
