COMPLIANCE
This product complies with all relevant British and European safety standards:
WIRING
This product is manufactured to class I category and must have an earth connection.
COLOUR CODING:
L - Live = Brown
N - Neutral = Blue
- Earth = Green & Yellow
LIGHTS.
To obtain a replacement LED lamp if faulty or broken contact customer services (see details at
foot of page) quoting product code ML420.
OUTSIDE
ZONES
Installation Procedure
The wall surface must be of suitable strength and construction.
1) Measure the distance between the two fixing holes on the back of the mirror frame.
2) Draw a horizontal line on the wall using a spirit level approximately 60mm from the desired
position of the top of the mirror.
Mark the drill positions on the horizontal line using the dimension taken from step 1. Accurately mark
the 2 hole positions with a pencil, drill and fit the wall plugs.
NOTE: The wall plugs supplied are only suitable for solid stone / brick walls. For plasterboard walls use
specialist wall plugs.
3) The next step is to make the electrical connection from the mirror to the mains supply. Use the
connection wire found at the rear of the mirror to make the necessary connections in accordance with
the current IEE regulations. A second person will need to hold the mirror in place whilst electrical
connections are made.
4) Insert the wall screws supplied into the wall plugs. Leave approximately 5-10mm of the screw
standing proud of the wall. Mount the mirror onto the screws fitted to the wall. Ensure mirror is
securely mounted. before leaving unattended.
Strip wires to a suitable
length. DO NOT connect
to a plug & socket outlet.
THIS PRODUCT IS MANUFACTURED TO CLASS I
CATEGORY AND MUST HAVE AN EARTH CONNECTION.
! IF IN DOUBT CONSULT YOUR ELECTRICIAN !
Colour Coding:
L - Live
= Brown
N - Neutral = Blue
- Earth
= Green & Yellow
The heated pad is on when the light is on. DO NOT leave on for prolonged periods of time.
CLEANING
It is recommended that the unit is cleaned with a soft, dry, non abrasive cloth when turned off. Never
use cleaning agents or abrasive materials on any type of surface finish. Do not allow moisture to come
into contact with the electrical components.
Operating & Aftercare Instructions
Bluetooth
®
Connection and Controls
LIGHT ON / OFF
PREVIOUS TRACK
VOLUME UP
BLUETOOTH ON / OFF
NEXT TRACK
VOLUME DOWN
Pairing
Bluetooth
®
enabled devices:
Pairing occurs when two
Bluetooth
®
wireless technology enabled devices communicate with each other
and establish a connection. This information is then stored in the memory of each device meaning that
once initially connected, the two devices will not need to pair again.
Your Beat Mirror can link with up to seven separate devices. When this limit is reached any additional
devices paired will erase previous connections to accomodate the new pairing.
Connecting your
Bluetooth
®
enabled device to your Beat Mirror:
1. It is recommended that the
Bluetooth
®
connectivity of the device you want to pair with your Beat Mirror
is turned on first to make connection easier.
2. Press the button to put your Encore Mirror into pairing mode. There will be a short lag with no
visible activity while the device powers on, do not press the button again. The LED indicator light will start
to flash quickly and a beep indicates that pairing mode has been turned on and the mirror is discoverable.
3. On the selected
Bluetooth
®
enabled device select ‘Bluetooth Mirror’ from the
Bluetooth
®
device list to
connect to the mirror.
Note: Devices running
Bluetooth
®
Version 2.0 or earlier may need to enter a pairing code before a
connection is made. This code is a device default of 0000 or 1234. These devices will not need to enter a
pairing code again after the initial set-up. Some devices may also ask for the connection to be accepted,
which will be prompted on the device screen.
4. The mirror will beep twice to signal that a connection has been made between the two
Bluetooth
®
enabled devices and the indicator light will flash slowly.
5. Once connected, any music played on the paired device will play through the Beat
Mirror.
Tracks can be changed using the and buttons, paused with and volume can be adjusted
with and
6. The lights and heated demister pad can both be turned on with the button. The
Bluetooth
®
functions on the mirror will work regardless of whether the light is turned on.
The
Bluetooth
®
connection will automatically cease when the two paired devices are out of range.
To manually turn off the
Bluetooth
®
functions on the mirror, press and hold the button for 3
seconds. A long beep will confirm that
Bluetooth
®
functions have been turned off.
C
M
Y
CM
MY
CY
CMY
K
MLE420 _ RR_Beat Illuminated Mirror Instructions v4.pdf 2 03/09/2015 09:12:21
