ROOTS Wizzard 340 Pump, Operator'S Manual, Page: 12 / 18

12
Wizzard 340 Pump - Battery
Ÿ
Pass the free end of the pull cable through the plastic guide in
RH handle.
Ÿ
Plug the cable to the top handle assembly.
Ÿ
Install the fresh water tank in between the two pipe handles
and secure it using knobs.
Ÿ
Fix the two brushes using the brush shafts.
Ÿ
Now tighten firmly both the knobs and screws alternately.
Insert the dummy caps provided to cover the screws (2 nos) in
the top handle.
Ÿ
Secure the allen key in the slot
provided in the handle tube for
further usage.
MACHINE OPERATION
Ÿ
Set the switch in ON position and connect the charger with
battery.
Ÿ
Connect the charger to the power supply.
Ÿ
After 5 ½ hours the battery is fully charged.
Ÿ
Slide this knob to TOP position (a) (Working Mode) to operate
the machine. Slide this knob to BOTTOM position (b) to move
the machine from one place to other place and to park the
machine. By keeping the knob to top position (working mode)
and move the machine to operate.
a
b
Ÿ
The pull handle is used to spray fresh water in front of the
machine.