ROOTS RootsSweep B70, Owner'S Manual, Page: 18 / 21

18
RootsSweep B70
MAINTENANCE & SERVICE
Ÿ
The machine may be taken into operation only if all
guarding devices are fitted and in protective
position. As far as possible, cleaning should not be
done hand, but using appropriate tools or
equipment.
The electrical equipment of this machine uses a mains
voltage of 24 DC. Easy access to motor is possible by
opening the hood.
The fuses can be changed by removing the rear panel
assembly.
Electrical System
If there should be repeated cases of failure, look
for the reason. Any work at the electrical system
has to be carried out by specialized electricians
only.
Maintenance Work
Compliance with our recommendations concerning
maintenance work will give you the certitude always
having a machine at your disposal, which is ready to
work and in good operating condition.
Please contact your local Roots distributor; the people
there will be glad to perform that work for you. There well
trained personnel and genuine Roots spare parts are at
your disposal.
Ÿ
Well trained personnel and genuine Roots spare
parts are at your disposal.
Ÿ
In case of any inquiries or orders for spare parts,
please always quote the machine's serial number
mentioned on the nameplate.
Ÿ
The name plate is fixed near the battery
compartment of the machine.
Ÿ
When cleaning or servicing the machine, and when
replacing any parts, shut off the machine and on
principle disconnect the power plug from the power
supply.
Ÿ
Maintenance and repair work may be carried out
only by means of suitable tools and by the people
trained in the factory. - for reasons of safety, only
genuine Roots spare parts may be used.
Daily Weekly
Empty the dirt hoppers
Clean the broom space
Clean the panel air filter in the dust
vacuum using the shaking device, check it
for damage and replace if necessary
Check the rotary broom and side broom;
clean or replace as necessary
Check the function of the fan
Check the seals on the dirt hopper
Test drive and function test
Activity
Interval
Check the battery charge, recharge if
necessary
Check sealing aprons (2 side aprons,1 rear
apron) for wear and clearance, replace if
necessary
Check the sweeping pattern; readjust, if
necessary
Check the filter system (panel air filter) for
leaks