A
B
D
C
Step2
Locate the power cord C
attached to the bottom back
and connect to plug D located
at the rear of seat.
Step 1
Slide the metal receiver over the
metal post.Press both sides of back
firmly downward until locked in
place.
A
B
C
D
Step 3
Insert the male KD Bracket into the slot
A
B
C
D
Step 4
The Transfomer is attached to the bottom
of rail and connect to DC Port located at
the rear of arm.
Male
Insert the male KD Bracket into the slot
of the female Bracket pressing firmly
downward until the frame is tight.
Female
Note: Make sure all PLUGS are
connected on the product before
plugging power cord into power outlet. If
not damage can occur.
The USB ports (where applicable) are
designed with working voltage of 5V,
and can NOT be used to supply power
for laptop computers (neither PC or
Mac). Plugging a laptop computer to the
USB port may end up damaging either
the computer or the USB port due to
unmatched working voltage.
unmatched working voltage.
