6.
8.
Step 6 - Product position and orientation
7a. Ensure the side of the rooflight with
the ‘Cill’ identification sticker applied, is at
the lower end of the roof fall.
7b. Lower the rooflight frame on to the kerb
upstand ensuring an even gap to all sides.
Ensure cill of rooflight is orientated at the lower end of the kerb fall.
Step 8 - Fitting the cover trim
The cover trim has a top and bottom face - please take note of the orientation when
attaching the trim profiles.
9a. Push the cover trim on to the frame. An audible ‘click’ will be heard when fully
fitted. Press along the entire length of the trim to ensure it is fully engaged onto the
rooflight frame.
9b. Repeat for all four sides of the rooflight frame.
TOP