manualshive.com logo in svg

Ronstan BB Orbit Block RF25109 20 Series, User Instructions

Share
Download
Ronstan BB Orbit Block RF25109 20 Series User Instructions Download Page 6

3.0 CARE AND MAINTENANCE 

4.0 DEFINITIONS

Lashing attachment

•  To receive the maximum performance benefit from the Lashings, they must be used correctly installed, inspected regularly and replaced 

when required.

•  Lashings must be attached to a mounting point with a smooth, well rounded profile without sharp edges or burrs. If in doubt, use a 

shackle with a smooth surface between the Lashing and the mounting point.

•  Lashings will eventually suffer degradation from fatigue, wear and UV exposure. Like all running and standing rigging, Lashings should be 

inspected as a part of your regular boat maintenance program and replaced if they show significant wear or fibre damage.

Orbit Blocks™

•  Grit and sand will damage bearing systems. Ronstan Orbit Blocks™ have a precisely engineered bearing system that should be kept clean 

and free of sand and grit to ensure optimum performance and service life. Blocks, in particular the bearing areas, should be flushed with 
fresh water regularly and periodically cleaned with a mild detergent and water.

•  Dry lubricants such as Ronstan Sailfast silicon spray may be used to lubricate the bearing system. Oil/petrochemical based lubricants 

must not be used.

•  Ronstan Orbit Blocks™ are designed and manufactured for applications on sailboats.
•  See the INFO section of the Ronstan web site and our catalogue for important customer considerations and warranty information.

BB  =  Ball Bearing     MWL  =  Maximum Working Load     BL  =  Breaking Load
Dyneema

®

 is a trademark of Royal DSM NV.

DSM is the inventor and manufacturer of Dyneema

®

, the world’s strongest fibre™. “Dyneema

®

”, and “Dyneema

®

, the world’s strongest 

fibre™” are trademark(s) (applications) owned by Royal DSM NV.

Summary of Contents for BB Orbit Block RF25109 20 Series







Reviews:

No comments

Brands by name

Popular brands

Load more brands