MADE IN KOREA
RME0300-V2
CABLING INSTRUCTION
■
Cable Assembling for Analog / HD Cameras
3
1
Connector
fixing screw
2
Cable Holder
①
Cable is unfixed on the Dome base.
②
Fix the power supply connector with fixing screw as illustrated.
③
Tie up the BNC cable with cable holder.
④
Connect the wiring connector to their repective connections.
* Refer to the signal assignment for wiring connection.
* Refer to the signal assignment for wiring connection.
①
Cables are unfixed on the Dome base.
②
Organize the cables to fix the dome base as illustrated.
Fix the power supply connector with fixing screw.
③
Connect the ethernet cable to the coupler board.
④
Tie up the cables with the cable holders.
⑤
Check the final view for cable exit.
⑥
Connect the wiring connector to their repective connections.
Cable holder-1
Coupler Board
■
Cable Assembling for IP Cameras
Cable holder-2
3
4
4
5
1
Connector
fixing screw
2
▀ Singnal Assignment
~24V/ DC12V
~24V/GND
Alarm-In
Alarm-Out
GND
Audio-In
GND
Audio-Out
~24V/DC12V
~24V/GND
RS485(RTX+)
RS485(RTX-)
