INDUCTION PRESSURE WASHER
6
It is recommended that the electric supply to this appliance should
include either a residual current device that will interrupt the supply if
the leakage current to earth exceeds 30mA for 30ms.
IMPOTANT:
Only use water without any impurities.
- Safety devices
- If there is a risk of running sands in the inlet water (i.e. from your own
well), an additional filter should be mounted.
- The unloader valve can reduce pressure if it exceeds pre-set values.
The spray gun features a locking device. When the pawl is activated, the
spray gun cannot be operated.
- Thermal sensor
A thermal sensor protects the motor against overloading. The machine
will restart after a few minutes when the thermal sensor has cooled.
ASSEMBLY
- The high pressure cleaner is designed to clean vehicle, machines,
buildings, facades, etc. in the private sector.
- The washer must be used standing on a secure, stable, positioned as shown.
- Fit the lance into the gun and rotate it until the two parts are completely locked.