AIR RIVETER
4
operative.
6) Make certain to stand on a solid or firm location and keep body in
well-balanced position while operating this tool.
7) Always turn off the air supply and disconnect the air hose before
changing rivet nose or making adjustments on this tool.
8) Release the throttle lever to avoid danger if there is a failure of energy
supply or when connecting or disconnecting the air hose.
9) Beware if the compressed air hose breaks unexpectedly, or is being
connected or disconnected improperly. This whipping action may cause
injury.
MAINTENANCE
1. Disassemble and clean all the components inside the front housing
with pressured air.
2. Take the piston assembly apart from the air cylinder, clean and apply
some pneumatic oil to both piston and cylinder walls.
3. Rehabilitate the tool by assembling everything back reversely.
PROCEDURE TO CHANGE NOSE PIECE
Step 1: Use Multi-Wrench spanner to remove the Nose Piece.
Step 2: Choose the size you need and use Multi-Wrench spanner to
assemble the Nose Piece.
Note:
Noses are equipped on the tool
