USER MANUAL
5
vibraton or other defects are detectedhave it repaired.
Wear hearing protection while operating the power tools. The declared
vibration total value has been measured in accordance with a standard
test method and may be used for companing one tool with another.
The declared vibration total value may also be used in a preliminary
assessment of exposure.
WARNING!
The vibration emission during actual use of the power tool can differ from
the declared total value depending on the ways in which the tools is used.
There is the need to identify safety measures to protect the operator that are
based on an estimation of exposure in the actual condition of use (taking
account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time).
ASSEMBLY
.
CHANGING THE TOOL
-Before any work on the power tool(e.g.maintenancetool change etc.)as
well as during transport and storageset the rotational direction switch to
the center position.unintentional actuation of the on/off switch can lead
to injuries.
-The drill spindle is locked when the ON/OFF switch 5 is not pressed.
This makes quickconvenient and easy changing of the tool in the drill
chuck possible.
-Open the keyless chuk by turning in rotation direction until the tool can
be inserted.insert the tool.
-Firmly tighten the collar of the keylees chuck by hand in rotation direction.
.
REPLACING THE DRILL CHUCK
Before any work on the power tool(e.g.maintenancetool change etc.)as
well as during transport and storageset the rotational dircttion switch to
the center position.unintentional of the on/off switch can lead to injuries.
