2
Install the battery onto the Ronin lift, by sliding down from the top of the
Ronin with some force. Be sure the battery is fully seated with the retaining clip
being locked in place. Make sure the Battery Indicator is showing the current
battery charge reading. (Note: The battery indicator light should be Green in
color. If the light is Amber or Red, then charge the battery, before use.)
Check motor function by slowly rolling the thumbwheel down.
Check if the motor increases speed, with full rotation of
thumbwheel? When thumbwheel is released, does it spring back to
neutral and stop the motor? (Note: If the Ronin fails either test, then
discontinue use of the Ronin and send in for service). (
Note: If Ronin
is equipped with the Deadman Trigger option, then make sure you
cannot perform any of the above steps without pulling the trigger.)
Inspect Cam Cinch (Brake) head and pick out any debris stuck
in the teeth.
Inspect the carabineer clip attachment points and ensure there
are no cracks or deformation. (Note: Scratches and/or general wear &
tear is acceptable).
Ronin Lift New User Guide
PN: 2805-11
Prior to use, please go through the equipment checklist below.
This User
Guide is for Ronin Lift’s with Serial Numbers 3201-R or higher.
Equipment Inspection
Variable
Speed
Thumbwheel.
Roll down to
activate.
Cinch
Teeth
Lower
Carabineer
Attachment
Point
REV. Q: DATE: DEC 10 2020
