5
4
Internal Structure
Massage rollers for neck
Massage rollers for back
Vibration Wave
Caution
This products is only for upright use. It is forbidden to lay
the Product flat for use..
Please do not operate the controller with wet hands, as this may
cause function failure.
Please do not put this Product near fire source and combustible
place.
Please do not use it by standing on it.
Please do not use it on bed.
Overload is not allowed
NAME AND FUNCTION OF EACH PART
NAME AND FUNCTION OF EACH PART
Instruction on Buttons of Controller
After connecting the power supply, press
button to turn on the overall unit,
and the corresponding LED light will
automatically be lighted; Press the
button once again to turn off the unit, at
this moment, the LED light will keep
flashing until the massage rollers reset to
its original lowest position.
During massage, press this button to
activate the heating function, and its
corresponding LED light is lightened.
Press this button again to turn off the
heating function.
When under manual massage mode,
press
button to switch to
automatic mode.
Press
button to switch back to
manual mode.
When green light is on, the massage
rollers travel on upper back;
When red light is on, the massage
rollers travel on lower back;
When orange light is on, the massage
rollers travel on whole back
Press
button, to activate vabrition
function on seat, the corresponding LED
light is lgihted. To cancel this function,
press this function button again.
Press
button, to activate kneading massage function on
neck, the corresponding LED light is lgihted. To cancel this
function, press this function button again.
