background image

Xiamen Rongta Technology Co., Ltd. 

 

www.rongtatech.com

 

 

 

1

PRODUCT INTRODUCTION 

Model: RP58 is a POS direct thermal receipt printer with easy operation and high 

cost effective, which is widely used in supermarket, hospital, restaurant, bank, oil 

station, turnpike etc. 

Safety Notice 

        Please read carefully and strict compliance with use of following instructions 

before operating the printer. 

1.

 

Safety Warning 

Warning: 

Do not touch the cutter of printer. 

Warning: 

The print head is heating element; do not touch it and its peripheral 

parts during the printing process or the print just ended.   

Warning: 

Do not touch the surface of print head and its connections to avoid 

damage it. 

2.  Notice 

(1)    The printer should be installed at a firm place and avoid it in vibration and 

shake.     

  (2)    Do not use or store the printer in the location of high temperature, humidity or 

heavy pollution. 

(3)    The power adapter of printer should be connected to a properly grounded 

socket. Avoid using the same socket with other large electronic machines or 

the equipments which could cause the voltage fluctuation.   

  (4)    Do not let water or foreign objects get inside the printer, if it happens, please 

turn off the power supply immediately.   

(5)    Printer could not be worked under the paperless process; otherwise it would 

seriously damage the print roll and the thermal print head. 

  (6)    Please disconnect the power supply if a long time not to use the printer.   

  (7)    The user is not allowed to dismantle the printer by self for repairing or 

remolding. 

Summary of Contents for RP58
















Reviews: