If the self-test is normal, check the following content
1. Check the interface on both ends between the printer and the computer. At the same time
confirm the connection is to satisfy a printing machine and computer specifications.
2. Data transfer settings between printers and computers may differ. You can use the self checking
to print interface setting of the printer. If the printer can't print, please contact the dealer or
technical service personnel.
X. Printer driver
There are two kinds of driving methods of ACEH1 printers. One is to install driver directly under
Windows9x/ME/2000/XP, and another is to use a network port and drive directly.
10.1 Driver installation under Windows
In the Windows you could add printer, and drive plate driver specified file to the Windows, just
need to transfer the print command and you can begin to print. In this way,the fact is the printer
driver in Windows converts characters into graphic dot matrix to print.
10.2 Direct drive of serial ports
In this way, it doesn't need to use the driver, only need to output the characters directly to the port,
and the printer in the department of hard word stock could achieve conversion print of character
font. The printing way could change to line printing from page printing if you use port direct
drive way and it is convenient to control print.
It needs to use the instruction set to control the printer to print if using port direct drive, and
ACEH1 printing machine internal has integrated the ESC/POS command set.
