Introduction
1.2.1 PEEDI as a standalone FLASH programmer
PEEDI can be used as a FLASH programmer in two ways:
•
The first way ( Figure 1.3: FLASH programmer with PC) is to connect to PEEDI via telnet
and execute FLASH command and script files from the command line interface (CLI). This
method enables users to see all the status messages in an easy, understable format i.e.
warnings and errors and therefore, maybe the preferred method.
Figure 1.3: FLASH programmer with PC
•
The second way (Figure 1.4: FLASH programmer without PC) is to use the front panel
interface to choose, start and observe the status of scripts, which invokes the desired FLASH
commands. Here you can define an AUTORUN script to be executed every time a target is
connected; this way there is no need to start the script manually – very useful and time
saving when large volumes of target boards need to be programmed.
Figure 1.4: FLASH programmer
without PC
PEEDI User’s Manual
14
