Ronde & Schwarz 1304.0004K03, User Manual

Page: 567 / 1071

Network Operation and Remote Control
R&S
®
FPL1000
567 User Manual 1178.3370.02 ─ 11
Risk of network problems
All parameters can be edited here; however, beware that changing the computer name
has major effects in a network.
For details, see
Chapter 9.5, "How to Set Up a Network and Remote Control" ,
on page 577.
Computer Name ..........................................................................................................567
IP Address ...................................................................................................................568
Subnet Mask ............................................................................................................... 568
DHCP .......................................................................................................................... 568
Network Configuration .................................................................................................568
Computer Name
Each instrument is delivered with an assigned computer name, but this name can be
changed. The naming conventions of Windows apply. If too many characters and/or
numbers are entered, an error message is displayed in the status line.
The default instrument name is a non-case-sensitive string with the following syntax:
<Type><variant>-<serial_number>
For example
FPL1003-123456
The serial number can be found on the rear panel of the instrument. It is the third part
of the device ID printed on the bar code sticker:
Network and Remote Control Settings