Ronde & Schwarz 1304.0004K03, User Manual

Page: 262 / 1071

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
262 User Manual 1178.3370.02 ─ 11
For more information on using limit lines, see Chapter 6.11.2.1, "Basics on Limit Lines" ,
on page 426.
6.2.14.4 EMI Measurement Configuration
Access : "Overview" > "Select Measurement" > "EMI" > "EMI Config"
On the R&S FPL1000, EMI measurement configuration consists of the following set-
tings.
In addition, some common settings are also relevant for EMI measurements:
●
Chapter 8.7.2, "Transducer Settings" , on page 533
●
"Reference Level" on page 313
●
Chapter 6.11.2.2, "Limit Line Settings and Functions" , on page 431
● EMI Marker Configuration ..................................................................................... 262
● EMI Final Measurement Configuration ..................................................................265
● LISN Control Settings ............................................................................................269
EMI Marker Configuration
Access : [MKR] > "Marker Config"
The initial peak search for the EMI measurement is defined by the marker configura-
tion.
Selected Marker .......................................................................................................... 263
Marker State ................................................................................................................263
Marker Position X-value .............................................................................................. 263
Marker Type ................................................................................................................ 263
Reference Marker ....................................................................................................... 263
Linking to Another Marker ........................................................................................... 264
Measurements and Results