![Ronde & Schwarz 1304.0004.03 User Manual Download Page 857](http://html1.mh-extra.com/html/ronde-and-schwarz/1304-0004-03/1304-0004-03_user-manual_1484985857.webp)
Remote Commands
R&S
®
FPL1000
857
User Manual 1178.3370.02 ─ 09
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
<m>
Manual operation:
See
11.8.8.5
Retrieving Marker Results
The following commands are used to retrieve the results of markers.
You can use the marker values to position the center frequency or reference level
directly using the following commands:
●
CALCulate<n>:MARKer<m>:FUNCtion:CENTer
●
CALCulate<n>:MARKer<m>:FUNCtion:REFerence
Useful commands for retrieving results described elsewhere:
●
●
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:COUNt?
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X?
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y?
●
CALCulate<n>:MARKer<m>:FUNCtion:NOISe:RESult?
●
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:RESult?
●
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer:RESult?
●
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer:RESult?
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult?
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency?
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:QFACtor?
●
CALCulate<n>:MARKer<m>:COUNt:FREQuency?
Remote commands exclusive to retrieving marker results
CALCulate<n>:DELTamarker<m>:X:RELative?
................................................................. 857
................................................................................. 858
........................................................................................ 858
CALCulate<n>:DELTamarker<m>:X:RELative?
This command queries the relative position of a delta marker on the x-axis.
Setting Basic Spectrum RF Measurement Parameters