Ronde & Schwarz 1304.0004.03, User Manual

Page: 539 / 1076

Network and Remote Operation
R&S
®
FPL1000
539 User Manual 1178.3370.02 ─ 09
10 Network and Remote Operation
In addition to working with the R&S FPL1000 interactively, located directly at the instru-
ment, it is also possible to operate and control it from a remote PC. Various methods
for remote control are supported:
●
Connecting the instrument to a (LAN) network
●
Using the LXI browser interface in a LAN network
●
Using the Windows Remote Desktop application in a LAN network
●
Connecting a PC via the GPIB interface
How to configure the remote control interfaces is described in Chapter 10.4, "How to
Set Up a Network and Remote Control" , on page 591.
● Remote Control Basics ......................................................................................... 539
● GPIB Languages ...................................................................................................577
● Network and Remote Control Settings ..................................................................578
● How to Set Up a Network and Remote Control .....................................................591
10.1 Remote Control Basics
Basic information on operating an instrument via remote control is provided here. This
information applies to all applications and operating modes on the R&S
FPL1000.
For additional information on remote control of spectrum analyzers see the following
application notes available from the Rohde
& Schwarz website:
1EF62: Hints and Tricks for Remote Control of Spectrum and Network Analyzers
1MA171: How to use Rohde & Schwarz Instruments in MATLAB
1MA208: Fast Remote Instrument Control with HiSLIP
● Remote Control Interfaces and Protocols ............................................................. 539
● SCPI (Standard Commands for Programmable Instruments) ...............................547
● VISA Libraries ....................................................................................................... 548
● Messages ..............................................................................................................548
● SCPI Command Structure .....................................................................................549
● Command Sequence and Synchronization ...........................................................557
● Status Reporting System ...................................................................................... 559
● General Programming Recommendations ............................................................576
10.1.1 Remote Control Interfaces and Protocols
The instrument supports different interfaces and protocols for remote control. The fol-
lowing table gives an overview.
Remote Control Basics