Ronde & Schwarz 1304.0004.03, User Manual

Page: 420 / 1076

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
420 User Manual 1178.3370.02 ─ 09
Vertical Line <x> ..........................................................................................................420
Horizontal Line 1/ Horizontal Line 2 ............................................................................ 420
Vertical Line <x>
Activates a vertical display line in the diagram at the specified point of the x-axis,
depending on the scale of the axis.
Remote command:
CALCulate<n>:FLINe<dl>
on page 899
CALCulate<n>:TLINe<dl>
on page 900
CALCulate<n>:PLINe<dl>
on page 899
Horizontal Line 1/ Horizontal Line 2
Activates a horizontal display line (H1 or H2) in the diagram at the specified point of the
y-axis.
Remote command:
CALCulate<n>:DLINe<dl>
on page 898
CALCulate<n>:DLINe<dl>
on page 898
7.11.1.3 Defining Display Lines
1. Display lines are configured in the "Lines Config" dialog box. To display this dialog
box, press the [Lines] key and then "Lines Config".
2. Select the "Display Lines" tab.
3. To define a vertical line:
a) select "Vertical Line 1" or 2.
b) Enter the x-value at which the line is to be displayed.
4. To define a horizontal line:
a) Sselect "Horizontal Line 1" or 2.
b) Enter the y-value at which the line is to be displayed.
Display and Limit Lines