Technical Instructions 5040.B
10/2013 M
RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, [email protected]
1
2000.574.G
Main plate
1.
3305.275.CO
Cannon pinion with driver (Aig.1)
2.
2030.017.CO
Centre bridge
3.
Centre bridge held by 1 screw 4000.250. Parts 2030.017.CO,
3402.009.CO, 3004.223 and 3500.59 must be exchanged together.
4000.250
Screw
4.
3001.055.FI
Sliding pinion
5.
3000.177.CO
Setting stem
6.
3017.049
Setting lever
7.
3905.049
Setting lever jumper (3 positions)
8.
Setting lever jumper held by 1 screw 4000.250.
4000.250
Screw
9.
3015.081
Yoke (3 positions)
10.
Parts 3015.081 and 3905.067 must be exchanged together.
3905.067
Yoke spring
11.
Tensioning the spring arm. Parts 3015.081 and 3905.067 must be
exchanged together.
3406.030
Pusher jumper B
12.
Put the grey jumper between the two posts on the further side.
3406.038
Pusher jumper A
13.
Put the yellow jumper between the two posts on the closer side.
3622.040
Stator
14.
Mark |Z| on stator.
3622.039
Stator (counter 6h, 9h, chrono)
15.
3622.039
Stator (counter 6h, 9h, chrono)
16.
3622.039
Stator (counter 6h, 9h, chrono)
17.
A
B
Summary of Contents for 5021.D
Page 5: ......
