14
4. PARAMETERS
•
4.1. Layout for front & rear panel
Function select key:
Select MMA or LIFT TIG.
ARC FORCE light:
This light when lit indicates that the added arc force value can be set by the
adjustment knob.
MMA current adjust:
This light when lit indicates that the welding current value of MMA can be
set by the adjustment knob.
HOT START light:
This light when lit indicates that the added hot start current value can be set by
the adjustment knob.
MMA light:
This light when lit indicates that the machine start MMA welding method.
LIFT TIG light:
This light when lit indicates that the machine start LIFT TIG welding method.
VRD ON light
VRD OFF light
VRD select key:
Choose VRD ON or OFF.
Welding current and other parameters display:
Welding current and other parameters display
when machine is working.
Power light:
Power indicator, power on light on.
Alarm light:
This alarm light when lit indicates that occurred over voltage, over current, or
overheating inside the machine, is protected.
Parameter select and adjust key:
Control the parameter select and adjust.
Positive polarity output:
Connect with welding electrode or connect to earth clamp when use TIG
function.
Negative polarity output:
Connect with earth clamp or connect to TIG gun when use TIG function.
Power source input:
To connect power source.
On/off switch:
Control power through and break
FAN:
Cooling the machine.
Summary of Contents for Ronch Weld 315MAX
Page 1: ...1 SERIES 315MAX STICK TIG ...
Page 28: ...28 5 3 Electrical principle drawing ...
Page 29: ...29 315MAX STICK TIG ...
