170613
ronbow.eu | ronbow.com
INSTALLATION SHEET
2
NOCE
50” LED Hutch
Model
:
E034150
E034250
Designed By:
MATTEO THUN & ANTONIO RODRIGUEZ |
ITALY
Figure 2.
Figure 1.
Step 2:
Cut a rough opening for the
electrical box.
Connect the wires from the hutch to
the wires of the electrical box.
Place the transformer located in the
back of the hutch into the wall.
Measure the distance of the hutch
width and height.
Mark the intersection of the center
of the hutch width and the height
of the hutch. The x, y location is the
suggested L-bracket location.
NOTE:
Locate a stud and place the L-
bracket at the x, y.
x= Height of the C height of
hutch
y= Width of the hutch @ desired
location
x=
y=
Step 1:
See Figure 2.
See Figure 1.
INSTALLING L-BRACKET
