IMPORTANT:
1. Keep all the children and pets away from the assembly area. Children and pets should be supervised while the
product is being assembled.
2. The assembled product should be located at least 6 feet (2 m) from any obstruction such as a fence, garage,
house, overhanging branches, laundry lines, or electrical wires.
3. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.
4. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of
personal injuries and damage to equipment. Please read all the instructions before assembly and use.
5. For outdoor use only.
Care & Maintenance:
Our steel components for garden accessories and furniture are treated with rust-inhibiting paint that protects them
from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings
are scratched. This is not a defect and thus not covered by the warranty.
To minimize this condition, we recommend care when assembling and handling the product to prevent scratching the
paint. Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint.
Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation
(rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping on the deck or patio and
caused damaging stains, which may be difficult to remove. This can be prevented if the above-mentioned measures
are taken to keep the product from oxidizing.
Weight Capacity:
50 lb (22 kg)
Parts list
Part
Description
Quantity
A
Base
2
B
Glass
2
Place the glass (B) into the tabletop frame. Your table is ready to be used.
