Hardware Pack 3
Part Description
Quantity
Image
HH Ring 52PCS
II
Stake
̛
8X180
16PCS
Fig.8: Insert the middle
beams (J1 and J2) into the big
connector (Q).
Fig.9: Secure the lower end of the
middle beams (J1 and J2) to the U
flap by using screws (EE) and flat
(
)
Fig.10: Insert the slanting
beams (N) into the small
connector (P).
Fig.11: Secure the beams (M1
and M2) to the slanting beams
(N) by using screws (EE), flat
washers (BB) and nuts (FF).
Fig.12: Put the PCs (S1 and S2) on the
small top and secure the flap (O) to the
small top beam by using flat washers (BB)
and nuts (GG).
Fig.13: Assemble the cover
(R) then assemble the finial
(W).
Fig.14: Attach the big canopy (U) to
the top frame. Lift the assembled
small top, then insert the slanting
beams (N) into the big connector
(K).
Fig.13-1: Assemble the small
screen (X) to the small top.
washers BB
and nuts (FF).