fire. Always plug heaters directly into a wall
outlet/receptacle.
14. Use the heater only as described in this manual.
Any other use not recommended by the
manufacturer may cause fire, electrical shock, or
injury to persons.
15. Do not attempt burn wood or other materials in this
electric fireplace.
16. This appliance comes equipped with an overheat
protection safety device. Should the appliance
begin to overheat for any reason, it will
automatically turn all heater functions of the
appliance off. The appliance will have to be reset
prior to continuing use. To reset the overheat
protection safety device, turn all controls off and
unplug the appliance, wait 10 minutes, plug the
appliance back and turn on.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION IIIINSTRUCTIONS
NSTRUCTIONS
NSTRUCTIONS
NSTRUCTIONS
#1
wall bracket
1PCS
#2
bracket
1PCS
#3
plastic anchors
7PCS
#4
screws ST4.2*40
7PCS
#5
screws ST3.5*8
2PCS
#6
pebbles
1bag
Tools required :
Philips Screwdriver(Not Included)
Step 1: Drill 7 holes onto the wall: 5 holes evenly spaced, 1035 mm from ground and 2 holes evenly spaced, 584
mm from the ground as shown in Figure 1 . Then insert 5 plastic anchors (#3) onto the predrilled holes, finally use
the 5 screws(#4) to fix the wall bracket (#1) onto the wall as shown in Figure 2.
