Attention: Please read the following instructions carefully to ensure that mounting operation will be carried
out in the right way .These instructions should be properly preserved for future reference. This lamp can not
be used on building sites, engineering workshops and similar applications.
I.Main construction Date
Type : 96200
Rated Power : Max 500 W
Glass : 177 x 140 x 5 mm
Weight : 1.56 kg
Dimensions : 3178 x 230 x 210 mm
Electric shock protection class:
Ⅰ
External light protection class: IP54
Lamp socket size:R7s
Rated voltage: 220-240V~ 50Hz
Cable:H05RN-F 3G1.0mm
2
II.Safety instructions
1.
Don’t touch the hot surface by hand during adjustment and normal operation because of high
temperature.
2.
Far away from the products easy to burn or burst.
3.
Don’t look at the bulbs directly with eyes.
4.
Don’t use the item without glass and stand.
5.
Replace any cracked protective shield.
6.
The bulbs couldn’t exceed the rated power.
7.
The distance between the item and the objects must be more than 1M.
8.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
III.Electrical safety
This halogen lamp must be earthed. If it becomes necessary to re-wire the plug please follow these guidelines.
Always secure wires in plug terminals carefully. Make sure the cable is firmly located in the cord grip. NEVER
connect the green & yellow wire to any terminal other than one marked with the earth symbol ‘E’ or ‘
’,
regularly inspect all electrical connections and wiring for damage Any faults should be immediately rectified
before further use of this halogen lamp. Always have the wiring and connections checked by a qualified
electrician. In use, ensure all wiring and extension cable are kept clear of any cutting tools, sharp objects and
any other potential hazard such as wet floors, chemicals, solvents etc.
NOTE: If your mains wiring differs in any way from Diagram A. Consult a qualified electrician. Always ensure
that the mains supply voltage is correct. Always replace the fuse with one of an identical rating.
IV.Assembly and use
HALOGEN LAMP
Réf. 96200
INSTRUCTIONS FOR USE
