Rompa TWILIGHT TURTLE 20491 Quick Start Manual Download Page 3

Page 

3

 of 

6

 

Copyright ROMPA® Ltd 

TWILIGHT TURTLE 20491, KH 5.11 

SAFETY 

1. 

Always supervise the use of this product. 

2. 

This product is intended for visual purposes only – not for rigorous handling. 

 

CARE AND MAINTENANCE 
Cleaning 

1. 

Surface washable only – use a soft cloth that has been very slightly dampened with a 
mild soap and water solution. 

2. 

Do not immerse in water. 

3. 

Allow to air-dry naturally. 

Battery Care 

4. 

Replace the batteries when the projection becomes faint. 

5. 

Batteries should be changed by a competent adult. 

6. 

Do not mix old and new batteries. 

7. 

Do not mix alkaline, standard or rechargeable batteries. 

8. 

Do not attempt to recharge non-rechargeable batteries. 

9. 

Use only batteries of the correct specification. 

10. 

Insert batteries correctly, observing the correct polarity. 

11. 

Remove exhausted batteries from the product.   

12. 

Remove batteries if the product will not be used for long periods. 

13. 

Do not short-circuit the supply terminals. 

14. 

Dispose of batteries appropriately and responsibly. 

General Care 

15. 

Once this product is eventually exhausted, please dispose of it appropriately. 

16. 

There are no accessible bulbs to change. 

 

SPECIFICATION 

All new materials 
Meets requirements of EN71 and ASTM 

 

 

Further copies of these instructions can be downloaded at www.rompa.com 

We hope you find our instructions invaluable.  If you have any suggestions for improving them 
further your comments will be greatly received – please contact us at 

[email protected]

 

 

Summary of Contents for TWILIGHT TURTLE 20491







Reviews: