Page
2
of
4
Copyright ROMPA® Ltd
TALKING CARD 20365, KH 1.11
To record a message
3.
Open the card and pull out the white activating tab. Place your thumbs on the two black
buttons on the inside back (page 3). The two black buttons are approximately 1” from
the bottom and 3” apart – see below:
4.
Press down and speak clearly approximately 6” from the card. Ensure that your thumbs
remain pressed down so that the red light remains on as you record. Do not block the
circle of small holes when recording.
5.
The message may be up to 10 seconds long and may be re-recorded as often as you
wish (subject to battery life).
6.
When you have finished recording, close the card.
Please note
: if posting this card, bear in mind that it is thicker and heavier than standard
greetings cards – check its size and weight before posting to ensure that you have used
adequate stamps.
USE
The recorded message is played back automatically each time the card is opened.
SAFETY
Always supervise the use of this product.
CARE AND MAINTENANCE
1.
Handle with care so as not to damage the card.
2.
The batteries included are not replaceable. When they are eventually exhausted, the
message function will no longer be usable.
SPECIFICATION
15 x 21 x 0.6cm (A5)
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving them
further your comments will be greatly received – please contact us at
Black buttons – hold down to
record a message
