Copyright ROMPA® Ltd
LIGHTS & MUSIC DOME 18310, KH 7.04
LIGHTS & MUSIC DOME 18310
CONTENTS
1 x Lights & Music Dome
1 x kettle lead
This product can be used with up to four external switches but these are not included.
BEFORE USE
Place on a flat, stable surface that can easily hold the weight of this product: 9.2kg.
Connect the kettle lead to the three-pin socket
B
on the side of the base.
Plug in at the wall. There is no ON/OFF button.
If using your own external switches (e.g. ROMPA®’s Tug Switch 15894) connect these to the jack
sockets
D
on the side of the base. Note that these are labelled by a colour dot to show you which
jack socket corresponds to which button
A
.
USE
1. Press the red button
A
(or activate the switch you have connected) to illuminate the red LED
lights.
2. Press the yellow button
A
(or activate the switch you have connected) and the coloured lights will
be illuminated.
3. Press the green button
A
(or activate the switch you have connected) to activate one of 25 tunes.
4. Press the blue button
A
(or activate the switch you have connected) to make the flower turn.
5. Do not block the holes
C
.
6. Unplug after use.
SAFETY
Always supervise the use of this product.
The dome is made of safety acrylic but should not be intentionally and repeatedly struck or kicked.
CARE & MAINTENANCE
Clean using a slightly damp soft cloth. Do not immerse in water or use abrasive cleaning products.
In the unlikely event of product failure do not attempt to repair this product yourself.
SPECIFICATION
Voltage input: 110/240V
Weight: 9.2kg
Size: 70 x 70 x 40cm