WORKING LOAD:
250 lbs for the Balance Buddy 2
300 lbs for the Balance Buddy 3
Take time to familiarize yourself with the use and maintenance of this
equipment before using. Please keep this Instruction Sheet in an
accessible location. The Instruction Sheet must be read and familiar to
anyone who is using the Balance Buddy. If this Instruction Sheet is
misplaced, please visit the product page on the FlagHouse website or
email (
) for a replacement.
IMPORTANT
Please check equipment immediately for any damage that may have occurred in shipping.
Contact FlagHouse immediately if there is a damaged piece 800.793.7900 (US & International)
or 800.265.6900 (Canada).
GENERAL INFORMATION
The Balance Buddy bolster seat is designed to give users another option to the Platform Board,
Reagan’s Ride and Sensory Wrap. The bolster seat is a very common therapist tool and is very
useful in sensory integration therapy. The seat challenges the balancing motor skills in a more
aggressive fashion than the platform board.
BALANCE BUDDY SEAT DETAILS
•
The Balance Buddy has 1” foam padding and is covered with marine grade vinyl all
around the circular surface and on the ends.
•
The Balance Buddy 2 seat has 6” total range of adjustment, up and down, to
accommodate the optimal height of usage.
•
The Balance Buddy 3 seat has a 12” total range of adjustment, up and down, to
accommodate the optimal height of usage.
SWING ASSEMBLY / DISASSEMBLY DETAILS
The swing comes assembled out of the box; no assembly necessary.
•
The seat is suspended by four vinyl covered chains. Two chains go into one connector
and the other two go into another connector.
•
Fasten these connectors into the swing’s linear connector points. Make sure the spring
clips have closed properly. See view one.