Colour Selection
The Wi-Fi signal can be interrupted and the microphone can be used to change the colour
to the one displayed on the microphone. The colour can be chosen by pressing the red
button to select a colour choice mode. In sequence these are:
Red
Green
Blue
Yellow
Purple
Alternate colours (shows a green LED first)
Intensity
The fixed colour modes: The colour intensity is constantly variable depending on the
volume of the sound that the Mic receives. i.e. loud noises make more intense colours and
quiet noises make less intense colours. This works on the fixed colour modes. You can
choose the colour by momentarily pressing the button. The LED on the Mic shows you
which colour is being transmitted. There is no overriding intensity setting as such, as the
intensity of colour is representing the loudness of the noise.
The last mode in the sequence of available modes changes colour with any noise picked up.
The intensity of each colour in the sequence is at full intensity.
14. Care and Maintenance
Wipe with a dry cloth. If moisture is required, then a cleaning wipe suitable for use with
electrical equipment is advised.
15. Troubleshooting
Not applicable.
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving them
further your comments will be greatly received – please contact us at
WI-FI MICROPHONE by ROMPA° 21917, January 2017
Copyright ROMPA® Ltd