12.
Technical Specification
Weight (excluding Power Supply Unit):
456g
Size (excluding Power Supply Unit):
8W x 4.5D x 24.5cmH
Number of LEDs:
52
AC110V-240V
50Hz – 60Hz
13.
Installation
Remove all packaging from the Lantern.
Check product to ensure that it hasn’t been damaged in transit. In the unlikely event
that any problems are found, contact ROMPA® immediately
Decide where to locate the Lantern.
The UV Lantern has two mounting holes to two sides to enable this to be secured to
a wall or other surface if required. It has a vertical and a horizontal mounting option.
Fig 1
Connect power cable (Fig 2) and plug into wall socket to charge. There is an LED that
indicates charging and goes off when fully charged, approximately around 3-4 hours.
Charge should last for around 10 hours on the dimmer light function setting and 4
hours on the brighter light setting.
Remove the Lantern when charged and switch on.
Fig 2
Connect the Power Supply Unit.
Mounting holes
