7.
Set the fan intensity to LOW or HIGH using the sliding switch on the front.
8.
Activate your switch to activate the aroma.
14.
Care and Maintenance
1.
Replenish the aroma as required. For additional aroma pads, you may wish to
purchase 21415 Felt Roll.
2.
Replace the batteries as required (as operation becomes erratic. Do not mix old and
new batteries, or batteries of different types.
3.
Wipe clean with a slightly damp cloth and a very mild cleaning solution.
4.
Before this fan was switch-adapted, it was possible to attach a 3V DC adapter.
However, once adapted, this adapter socket has been intentionally made redundant
– do not attempt to connect anything to this deliberately blocked socket.
15.
Troubleshooting
In the unlikely event of product failure, please check the following:
Problem
: Fan does not work
• Check the batteries are installed and try a new set of batteries
• Make sure the sliding switch on the front is not set to OFF
• Make sure that the jack plug of your switch is firmly pushed into the jack socket of the
adapted fan
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
SWITCH-ADAPTED AROMA FAN 21414, March 2015
Copyright ROMPA® Ltd