12.
Technical Specification
Size:
90H x 80L x 80cmW
Material:
Polyester
Speakers require a music system with:
Impedance: 6-8 OHMS
Maximum Power: 40 Watts RMS
Nominal Power: 10-20 Watts RMS
13.
Installation
1.
Unpack the Musical Squorner. Either store the packaging in a safe place, out of
reach of clients if you need the packaging for storage, or dispose of it appropriately.
2.
Place the Musical Squorner indoors, on a flat, stable surface. It is possible that some
of the filling may have displaced slightly during transit. With use this will even out
again, but you may wish to gently manipulate the cushion to make sure the filling
covers the enclosed box.
3.
A 2-way speaker control is provided to allow selection of sound and vibrations either
through the integral Squorner speakers or external speakers, or both at the same
time. Insert the two leads from the integral speakers into SPEAKER # 1 OUT on the 2-
way switch.
4.
Insert leads from the external speakers into SPEAKER # 2 OUT on the 2-way switch.
5.
Insert leads from music system into SPEAKER INPUT on the 2-way switch.
6.
Plug in music system.
7.
Select the required operation (tape/CD/radio) and adjust volume to required level.
8.
SWITCH 1 on the 2-way switch operates the integral speakers in the Squorner.
SWITCH 2 on the 2-way switch operates the external speakers. Any variation may be
selected.
NOTE: A high bass setting produces more vibration.
PLEASE NOTE
Music Systems supplied approximately 2008 onwards may have different speaker
connections compared with those of earlier models of music systems. Please refer to the
diagrams below in case you have a newer model of music system. Older models of music
systems tended to have small sockets with a round hole in that were covered by a small
pushable cover (often red and black):
