11.
Safety
Supervise the use of this product
For indoor use only.
Use only the power supply provided
12.
Technical Specification
Size:
145 x 145 x 72.5cmH
Input:
100v/240V 1.5 Amp
Output:
12V DC 5 Amp
Fuse:
There is a fuse in the UK plug only
Power supply: UL US CE listed
Lights:
LEDs
ROMPA uses latex-free foam to make our ballpools.
Our ballpool balls (e.g. 13674 etc) are also latex-free.
13.
Installation
1.
Ensure that the Illuminated Ballpool is sited in a suitable position near an electric mains
supply.
2.
Place the raised floor in the required position, ready to build the four walls around it.
3.
Ensure that the mains lead (and power supply) extend away from the raised floor
towards the electric mains supply.
4.
Build the walls around the raised floor, inserting the wooden tongue of one wall into the
slot on the other, ensuring the wooden hooks fully engage.
CARE SHOULD BE TAKEN WHEN LIFTING AND POSITIONING WALL SECTIONS
BECAUSE OF THEIR SIZE AND WEIGHT.
The tongued wall will rise as it is inserted and then drop level with the slotted wall
when they fully engage.
TO AVOID SPRAINING THIS JOINT KEEP THE ANGLE OF THE WALL AT 90
º
.
5.
Repeat this procedure for all the walls.
6.
Ensure that all leads are connected. Plug in to electric mains supply. Switch on. The light
will appear and change colour in sequence.
7.
Pour in the balls.
14.
Care and Maintenance
This product uses LEDs for lighting. It is highly unlikely that the LEDs will need to be changed.
Organise a regular cleaning schedule.
Wipe off accidental marks/liquids using a mild detergent and a damp cloth, avoiding excessive
amounts of water. Do not use abrasive cleaning products, bleach or solvent-based cleaning
products. Do not use liquid detergents used to wash up cups/plates.