Use indoors, in dry environments.
Keep cables safely out of reach.
Remove all packaging and either store this in a safe place out of reach of clients or
dispose of this responsibly. Plastic bags and wrapping can be hazardous to children
and vulnerable people.
Avoid sharp or pointed objects which could puncture the product. Take care with zips
on clothing etc. Remove shoes.
Do not place near sources of heat or fire that may damage the surface (radiators,
fires, underfloor heating, hot central heating pipes etc.)
This product contains a bead filling. The beads in the bead filling are small parts and
should always remain out of reach. Do not attempt to access the interior part of this
product. Never allow children or vulnerable people to access the interior part of this
product.
Should any seams or the zip become damaged, contact ROMPA
®
immediately to
arrange repair or replacement. Should the product require re-filling, contact
ROMPA
®
immediately to discuss this.
This product contains a bead filling. The beads in the bead filling are small parts and
should always remain out of reach. Do not attempt to access the interior part of this
product. Never allow children or vulnerable people to access the interior part of this
product.
Some of our products contain zips for manufacturing purposes only. Do not attempt to
open these or to access the interior part of these products. Never allow children or
vulnerable people to access the interior part of this product.
12.
Technical Specification
Weight:
approximately 40kg
Speakers require a music system with:
Impedance: 6-8 OHMS
Minimum Amplifier/Music System Output – 50W RMS per channel
Maximum Amplifier/Music System Output – 200W RMS per channel
13.
Installation
1.
Place the Musical Positioning Cushion indoors, on a flat, stable surface. The zip around
the PVC section should be on the floor. It is possible that some of the filling may have
displaced slightly during transit. With use this will even out again, but you may wish
to gently manipulate the cushion to make sure the filling covers the enclosed box. If
you can still feel the integral box, check that the cushion is the right way up.
2.
A 2-way speaker control is provided to allow selection of sound and vibrations either
through the integral cushion speakers or external speakers, or both at the same
time.
3.
Insert the two leads from the integral speakers into SPEAKER # 1 OUT on the 2-way
switch.
