12.
Technical Specification
Size:
2m x 1m x 35cmH
Amplifier:
code 22956
Fuses:
10 Amp fuse in the UK plug of the Amplifier
Oscillator (Control Box): T100mA
13.
Installation
1.
Choose a safe and suitably location for your Vibrating Floor. This product requires
two wall sockets – one for your music system and another for the Oscillator.
2.
Connect the two leads with the two mono jack plugs from the speaker box under the
Floor to the 6.3mm SPEAKER PUTPUT sockets (LEFT and RIGHT) at the back of the
Amplifier.
The Vibrating Floor can be operated using:
your music system
your music system and the microphone
the microphone
the oscillator
TO USE THE OSCILLATOR
Please note: No music can be played when the Oscillator is in use. The Oscillator uses
frequency to create vibration, not music. There will be some noise when the Oscillator is in
use as the speaker is still in operation, but not music. It is not possible to create vibration
using the floor silently.
3.
Connect the Oscillator into the mains (240V).
4.
Connect the kettle lead from the Oscillator into the back of the Amplifier. The socket
on the Amplifier is on the right, just above the ON/OFF switch.
5.
Connect the black lead that has a pair of RCA (phono) connectors on each end
between the Oscillator and the Amplifier. Connect one end of this lead to the
Oscillator. This end is colour co-ordinated i.e. black to black and red to red. The other
end of the RCA lead connects to the Amplifier. Connect the two leads with the two
mono jack plugs from the speaker box under the Floor to the 6.3mm SPEAKER PUTPUT
sockets (LEFT and RIGHT) at the back of the Amplifier.
