29
• Repeat this procedure, if required.
Cleaning thoroughly.
• Remove all detachable parts from the base unit.
• Clean the base unit with a moist cloth and dry it afterwards.
• Wash all accessory parts thoroughly in warm water (max. 60 °C) with some detergent. For a thorough
cleaning of all edges and gaps, use the included brushes.
• Remove and clean the sealing gaskets regularly. They should be disinfected from time to time with
disinfection agents for household use.
• Wait until all parts have dried before assembling the appliance again.
Tips for cleaning the accessory parts.
The appliance comes with two cleaning brushes, which make cleaning of the accessories easier.
• Juice jug:
o Drive of the wiper ring: Control that no residues accumulate below the gearwheel and that the
wheel can be moved freely.
o Pulp ejection channel: Clean the pulp ejection channel by releasing the closing seal; then press it to
the side. Clean the channel with the enclosed bottle brush. Finally press the sealing into the opening
of the pulp ejection channel again.
• Seal for motor drive:
For cleaning take the seal at once side, loosen by pulling it and take it out. Insert it again after cleaning.
Pay attention that the small ring of the seal sits below and the big ring above the drive compartment.
• Seal of the closing cap:
For cleaning cautiously loosen the screw, then strip off the seal from the plastic cover. After cleaning
reposition the seal on the plastic cover, then screw it hand-tight on the closing cap. Pay attention to not
overwind the screw!
