15
Inside temperature:
The interior of the appliance has become too warm
(e.g. by hindered air supply, blocked or defective fan or excessive
ambient temperature).
Self-help: Clean the air vents or remove any foreign matters
possibly located there, improve air supply.
Note: If the error cause is eliminated while error codes E
1
or E
2
are being displayed, the app-
liance will automatically resume operation subject to the previous setting.
With regard to all other error code indications, you will have to reset the control manually by
pulling the mains plug.
Safety in handling
• Do not operate the appliance without supervision.
The safest method to switch off the unit
is pulling the mains plug.
• Children and persons with handicaps of physical, sensorial or mental nature must not
operate this appliance without an adequate supervision and/or corresponding expert
advice and safety instructions.
• Children should be supervised so as in order to ensure that they do not play with
this appliance.
• Do not at all operate this unit with an external timer or a separate telecontrol system.
• Overheated fat or oil may ignite. That is why food containing fat or oil must be prepared
under supervision only.
• If cracks, fi ssures or breakage is caused and if it may be assumed that safe operation is no
longer possible, immediately turn off the appliance and disconnect the mains plug.
• Do not store any objects on top of the appliance, do not use it as a worktop and do not
transport it before you have disconnected the mains plug.
• Never immerse the appliance in water for cleaning. Please also make sure that no water or
steam can infi ltrate from below.
• This electrical appliance complies with the relevant safety regulations. If the appliance,
the cable or the sealing is damaged or if the glass plate is broken, disconnect the mains
plug immediately.
• Repairs may be effected by authorised specialist shops only. Improper repairs may constitute
a considerable danger to the user!
Cleaning and maintenance
Switch off the appliance and pull the mains plug. Remove any coarse residues with a special
glass scraper, which is available with specialised dealers and household equipment shops.
Thereafter, clean the cold glass surface with soapy water and wipe dry with a clean cloth or
kitchen tissue.
Cleaning agents suitable for glass cooktops are available on the market. Use a kitchen tissue to
treat the whole glass surface with the lotion by rubbing in as long as there is no soiling visible
anymore. Special cleaning agents to treat the aluminium casing are also available on the market
as required.
Never immerse the appliance in water and do not use steam jet appliances. Make sure no water
or steam can infi ltrate the appliance from below. Never use abrasives, steel wool or sharp,
scratchy objects.